Installation Instructions - Cooper Lighting Crosstour MAXX LED Instrucciones De Instalación

INSTALLATION INSTRUCTIONS

IMPORTANT: READ BEFORE INSTALLING FIXTURE.
RETAIN FOR FUTURE REFERENCE.
WARNING: Make certain power is OFF before starting installation or attempting any maintenance.
DOOR INSTALLATION
6. Ensure all electrical wires and connections are secured in the back box, re-install door and tighten
door screw to 15-20 inch lbs.
MAINTENANCE
NOTE: A regular maintenance schedule should be followed to retain optimal light output and thermal
performance. Optical lens cleaning should be performed with a clean dry cloth to remove any dust or
other contaminants. Additional lens cleaning should be performed with non-abrasive acrylic cleanser.
Remove any dirt, leaves, or other foreign debris from the housing and fins. Clean water may be used to
flush the fins.
WIRING DIAGRAMS
Connect all
Ground Wires First
Current Draw (Amps)
Model Series
Voltage
XTOR5A XTOR9A
120V 0.43A 0.72A
208V 0.25A 0.41A
240V 0.22A 0.36A
277V 0.20A 0.32A
347V 0.16A 0.26A
480V 0.12A 0.19A
These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible
contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user's purpose, please contact
your nearest representative. NOTE: Specifications and dimensions subject to change without notice.
Customer First Center
1121 Highway 74 South
Peachtree City, GA 30269
P: 770.486.4800 F: 770.486.4801
www.cooperlighting.com
ADH121888
Without Photocontrol Without Photocontrol
Driver Driver
Load (Black) Load (Black)
Factory Wired Factory Wired
Driver to LED Driver to LED
Neutral (White) Neutral (White)
With Photocontrol With Photocontrol
Driver Driver
Load (Black) Load (Black)
Factory Wired Factory Wired
Driver to LED Driver to LED
Neutral Neutral
(White) (White)
Load (Red) Load (Red)
Neutral (White) Neutral (White)
Line (Black) Line (Black) Supply Line (Black) Supply Line (Black)
Photocontrol Photocontrol
347V/480V without Photocontrol 347V/480V without Photocontrol
Supply Supply
Line (Black) Line (Black)
Factory Wired Factory Wired
Driver to LED Driver to LED
Supply Supply
Load (Violet)
Neutral (White) Neutral (White)
XFMR XFMR
347V/480V with Photocontrol 347V/480V with Photocontrol
Factory Wired Factory Wired
Driver to LED Driver to LED
Supply Supply
Neutral (White) Neutral (White)
Photocontrol Photocontrol
XFMR XFMR
Crosstour MAXX LED
TM
Wall Mount Luminaire
Sheet 2 of 6
2/4/2013
FIG. 4
Locking
Hinges
(3) Lever-Lock
Connectors
Driver Driver
Neutral (White) Neutral (White)
Line (Black) Line (Black)
Supply Supply
Neutral (White) Neutral (White)
Connect Supply Line Connect Supply Line
Neutral Neutral
347V 347V
Here for 347V Application Here for 347V Application
Load (Violet)
(White) (White)
(Orange) (Orange)
Supply Line (Black) Supply Line (Black)
480V (Violet/White) 480V (Violet/White)
Connect Supply Line Connect Supply Line
Here for 480V Application Here for 480V Application
Driver Driver
Neutral (White) Neutral (White)
Line (Black) Line (Black)
Supply Supply
Neutral (White) Neutral (White)
Load (Red) Load (Red)
Neutral (White) Neutral (White)
Connect Supply Line Connect Supply Line
Line (Black) Line (Black)
Here for 347V Application Here for 347V Application
Neutral Neutral
347V 347V
Load (Violet) Load (Violet)
(White) (White)
(Orange) (Orange)
Supply Line (Black) Supply Line (Black)
480V (Violet/White) 480V (Violet/White)
Connect Supply Line Connect Supply Line
Here for 480V Application Here for 480V Application
IMI-784