Lacrosse WT485 Manual De Instrucciones página 5

TO USE THE SNOOZE ALARM
When alarm sounds, press the SNOOZE/DIMMER once, the alarm will be silenced and come on
again according to the set snooze duration.
TO USE THE PROJECTION CLOCK
Press PROJECTION button to turn on or off the projection clock. Turn the focus knob on the
projector to adjust the image of the projected time onto the wall or ceiling.
TO USE THE HI-LO DIMMER
This clock radio features an adjustable display backlight (Hi-Lo-Off) with dimmer control. To select a
backlight setting, press the SNOOZE/DIMMER button until the brightness is reached. This setting can
only be selected when the radio is not playing.
Note: Please note the always-on backlight will not work while the clock is operating on battery power
only.
TO DISPLAY TEMPERATURE IN DEGREE C OR F
Single press – (°C/°F) to display temperature in degree C or degree F.
TO SELECT INDOOR OR OUTDOOR TEMPERATURE READOUT
Single press + / IN-OUT to display indoor or outdoor temperature readout.
TO USE THE OUTDOOR TEMPERATURE
Your wireless thermometer-clock radio is equipped with one outdoor sensor.
1 Press + / IN-OUT to display outdoor temperature readout.
2 Press and hold + / IN-OUT for 2 second, the display outdoor temperature shows "—":
3 In case the outdoor temperature shows "—", press the RESET button on the middle of the
outdoor sensor. The outdoor sensor will transmit the signal in few seconds.
TROUBLE SHOOTING
In case your wireless thermometer-clock radio shows irrelevant information or digits, it may be
affected by electrostatic discharge or interferences from other devices. Press the RESET at the
bottom of your unit. Your unit will be reset to default setting of time and calendar and you need set
time and calendar again.
English Page 5 of 9