Troubleshooting Guide - Ricatech RR510 Manual De Usuario

In case of trouble with the unit, please look through the problems and see if you can solve
them yourself before calling your dealer.
Problem
Power does not come on
when the power switch is
pressed.
No sound comes out of
the speakers
The sound is noisy.
The unit does not act as
expected.
CD stops immediately
after starting, or unit
pauses or stops during
play.
No sound.
Specific CD is noisy, or
playback stops or skips.
 "nod" is shown on the
CD display.

TROUBLESHOOTING GUIDE

Cause
Unit is unplugged.
The volume is turned
down (to MIN).
The input selector does
not match the playback
source.
The unit is too close to a
TV set or another
similar appliance.
The unit needs to
reboot.
The CD is inserted
upside down.
The CD is dusty or dirty
or there is condensation
on the CD.
The CD player is
paused.
The CD is scratched,
damaged or warped.
The disc is very dirty.
The CD is created,
damage or warped.
The disc is very dirty.
13
Solution
Connect the unit to the
AC power supply.
Adjust the volume.
Re-select the desired
input source.
Turn off the TV or other
appliance, and relocate
the unit.
Remove the power cord
from the AC outlet then
after one minute re-plug
the power cord.
Insert the CD with the
printed side right-side
up.
Carefully clean and dry
the CD.
Press the Play/Pause
button.
The CD should be
changed.
Carefully clean the CD.
The CD should be
changed.
Carefully clean the CD.