Factory Settings; Types Of Alarm; Table 7: Types Of Alarm - DAB EVOSTA2 Instrucciones Para La Instalación Y El Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 138
13.

FACTORY SETTINGS

Regulating mode:
= Minimum proportional differential pressure regulation
14.

TYPES OF ALARM

No. of curve height blinks
2 Blinks
3 Blinks
4 Blinks
5 Blinks
Alarm Code
E1
E2
E3
E4
E5
15.
MAINTENANCE
Cleaning and maintenance activities must not be carried out by children (under 8 years of
age) without supervision by a qualified adult. Before starting any work on the system, before
starting to look for faults it is necessary to disconnect the power supply to the pump (take
the plug out of the socket) and read the use and maintenance instructions.
16.
DISPOSAL
This product or its parts must be disposed of in an environment-friendly manner and in
compliance with the local regulations concerning the environment; use public or private local
waste collection systems.
INFORMATION
Frequently asked questions (faq) on the ecodesign directive 2009/125/ec establishing a framework for the
setting of ecodesign requirements for energy-related products and its implementing regulations:
http://ec.europa.eu/enterprise/policies/sustainable-business/documents/eco-
design/guidance/files/20110429_faq_en.pdf
Guidelines
accompanying
http://ec.europa.eu/energy/efficiency/ecodesign/legislation_en.htm - see "circulators"
ENGLISH
TRIP: loss of motor control, may be caused by incorrect parameters,
blocked rotor, disconnected phase, disconnected motor
SHORT CIRCUIT: short circuit on phases or between phase and earth
OVERRUN: software fault
SAFETY: safety module error, may be caused by a sudden overcurrent or
other hardware faults of the board
DRY RUN
TRIP: loss of motor control, may be caused by incorrect parameters,
blocked rotor, disconnected phase, disconnected motor
SHORT CIRCUIT: short circuit on phases or between phase and earth
OVERRUN: software fault
SAFETY: safety module error, may be caused by a sudden overcurrent or
other hardware faults of the board

Table 7: Types of Alarm

commission
regulations
47
Alarm Description
EVOSTA2
EVOSTA3
implementing
the
ecodesign
directive:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Evosta3

Tabla de contenido