AR Blue Clean AR 383 Manual página 8

Trigger
Fig. 5
Fig. 7
750ml
600ml
450ml
300ml
150ml
Fig.8
Straw
Fig. 9
En - 8
93248_Modelo AR383.indd 8
• To release the hose from the spray gun, press the blue
button on the underside of the gun toward the trigger guard.
The hose will slide out from the connection.
Spray Gun
750ml
600ml
• To lock the trigger of the spray gun aim the gun away from
450ml
300ml
150ml
you and push the lock button from right to left, (Fig. 5), after
Fig. 6
doing so, squeeze or pull the trigger to make sure it is locked
and will not move. Get in the habit of leaving the lock button
in the "locked" position when the power washer is not in use.
This ensures the gun is in "safe" mode until it is ready for
use.
Lance and Detergent bottle
• While the spray gun is in the locked position, insert the turbo
lance, the adjustable spray lance, or the detergent bottle
directly into the end of the spray gun by inserting and pushing
together and turning clockwise simultaneously. To remove
push together and turn counter clockwise (Fig. 6). Push the
safety lock button to lock the trigger when changing lances or
Gun
detergent tank, to ensure that they do not accidentally eject
with force during removal.
• When using the turbo lance, make sure the turbo nozzle is
screwed on tight at the end of the lance, each time you use
it. The Turbo lance is designed for high impact cleaning. Only
use on hard surfaces such as driveways, cement surfaces,
patio bricks, etc. A test strip should be done prior to avoid
chance of damaging the surface.
• When using the adjustable spray lance, the spray pattern
and intensity can be controlled according to power of water
needed for each task by twisting the spray nozzle at the far
end of the lance (Fig. 7). These can be used for sweeping
the widest variety of applications as the fan degree allows for
good impact pressure and cleaning coverage.
•
formulated detergent or cleaner with water ratio according
to instructions on the container (Fig. 8). The detergent bottle
you don't see the straw, look inside the bottle and attach it to
the screw-on top (Fig. 9).
Note: the ratio of water to detergent is 10:1 or 10 parts water to
1 part detergent.
2018/3/7 上午10:53