Camera Menu Organization; Camera Id; Iris - Samsung SCC-931T P Guia Del Usuario

CAMERA MENU Organization

CAMERA ID

In the CAMERA ID menu, you can assign an ID to the Camera that appears on the
screen of the monitor which is connected to the Camera.
In the setup menu screen, if you set the CAMERA ID to ON... and press the [ENTER]
E
key, a submenu screen where you can assign an ID to the Camera will appear.
You can use alphanumeric characters and a few special characters, which are shown on
the submenu screen, to assign a maximum of 12 characters tor the CAMERA ID.
You can use the LOCATION submenu to place the assigned CAMERA ID at a certain
location on the monitor.
CAMERA ID ON...

IRIS

ALC...
AUTO FOCUS AF
SHUTTER AUTO X8
MOTION F.FAST
WHITE BAL ATW
SYNC INT
SPECIAL ...
MOTION DET OFF
EXIT QUIT
"..." means that there is a submenu.
IRIS
The level of video output to the monitor can be controlled by the IRIS lens according to
the intensity of the incoming light. The Camera is basically equipped with an IRIS lens.
In the ALC (Auto Light Control) menu, you can set the video output level.
In the MANU... menu, you can manually set the opening and closing of the iris.
26
(CAMERA ID)
A B C D E F G H I J K L
M N O P Q R S T U V W X
Y Z 0 1 2 3 4 5 6 7 8 9
. : ! - + * () /
When you press
SP ❿ ❿ ➛ ➛SP
the [ENTER] key
LOCATION...
RET
..........
ALC (Auto Light Control)
If you set the IRIS to ALC and press the [ENTER] key, a submenu screen where
you can set the video output level and BLC will be displayed.
In the LEVEL item, you can use the [LEFT/RIGHT] keys to set the video output
level.
If you set the BLC menu to ON, the BLC function will be applied to the screen area
specified in the AREA menu.
The AREA menu, where you specify the screen area to which the BLC function will
be applied, can be set to PRESET or USER. If you set the AREA menu to PRE-
SET, the BLC function will be applied to the area specified at the time of factory
shipment. If you set the AREA menu to USER and press the [ENTER] key, users
can specify the area to which the BLC function will be applied.
CAMERA ID OFF...
IRIS ALC...
AUTO FOCUS AF
SHUTTER AUTO X8
MOTION F.FAST
WHITE BAL ATW
When you press
SYNC INT
the [ENTER] key
SPECIAL ...
MOTION DET OFF
EXIT QUIT
BLC (Back Light Compensation; a submenu of the ALC/MANU... menu)
If you use an ordinary camera when a strong light source, such as a spot light,
is shining from behind the subject, the subject will appear dark on the monitor
because of the back light. In order to solve the problem of back light, the
Camera appropriately sets the BLC, which is a submenu of the ALC/MAN, to
enable you to have a clear video under any light source.
E
(ALC)
AREA USER...
BLC OFF
LEVEL(0) ----|----
RET
27