ForaCare D20 No-Coding Manual Del Usuario página 41

Disinfecting Procedures
Step 1
Take out one disinfecting wipe from the package
and squeeze out any excess liquid in order to
prevent damage to the meter.
Step 2
Wipe all exterior surface of the meter including
the display and buttons. Hold the meter with the
test strip slot pointing down and wipe the area
around the test slot but be careful not to allow
excess liquid to get inside. Keep the meter moist
with disinfection solution contained in the wipe
for a minimum of 2 minutes for Micro-Kill+™
wipes. Follow the instructions on the package
label of disinfecting wipe. Use two or more wipes
if necessary.
Step 3
Remove the wipe. Allow the meter surface to dry
completely.
Step 4
Discard the used wipes and never reuse them.
Wash your hands thoroughly with soap and
water after handling the meter, lancing device
and test strips to avoid contamination.
41