Using Your Appliance; Practical Tips - Krups FDE3 Manual Del Usuario

Using your appliance

• Close the appliance and plug it in. The
indicator lights (d) and (e) will come on (1).
• Once the appliance reaches the right
temperature, the setting indicator light (e)
goes out (2).
During cooking, the setting indicator light (e)
will come on and go off again at regular
intervals in order to ensure the cooking
temperature remains constant.
• Open the appliance and place the food on
the plates.
• Close the appliance. The hinges (f) adjust
automatically according to the thickness of
the foods (3).
• Allow the preparation to cook for the
desired time.
• You can open the appliance at any time to
check on the progress of the cooking.
• Once cooking is finished, open the appliance
and take out the food, using a spatula to
avoid damage to the anti-stick coating (4).
• After use, unplug the appliance and allow it
to cool down.

Practical tips

• Do not use metallic or sharp utensils, as
they could damage the coating on the
plates.
• Because of the special hinges on the
appliance, you can cook foods of different
thicknesses (rib of beef, vegetables, sandwi-
ches and panini).
Cleaning
• Before cleaning the appliance, unplug it and
allow it to cool down.
• Never place the appliance in water or under
running water.
• To clean the outside of the appliance, use a
damp sponge and dry carefully.
• To clean the plates, use a damp sponge with
washing up liquid. Rinse and dry them with
care.
• Never use a scouring pad or powder.
FDE3.PM6.5 9
Storage
The appliance can be stored vertically to save
space. Close the latch (c) to facilitate vertical
storage (5).
What to do if your appliance
does not work
Check the electrical connection.
If your appliance still does not work, please
contact a contact an approved KRUPS service
centre (see list in the service booklet).
21/01/04, 13:50
9