Installation Of Accessories - Hkoenig NV60 Manual De Utilización

1. Take 175ml clean water with the measuring cup, and add the water into the tank. (Max.
capacity of the tank is 300ml. Do not overfill the tank and some space must be left in the tank).
Re-install the safety cap and tighten it in position.
2. Check the power supply and socket, and confirm they comply with the requirements given
in the User Manual. Then turn on the power supply.
3. About 4 minutes after power suppl y is turned on, steam is ready. At this time lightly press
the steam button and check whether steam is sprayed out of the nozzle. (Do not aim the spray
nozzle at other Persans or abjects).
4. If there is steam sprayed out, please install suitable accessories according to your needs
after you release the button.
5. Press down the steam button a gain in order to carry out the operations required by you.

INSTALLATION OF ACCESSORIES

1. Install the long spray cup
Hold the pipe section of the long spray cup in your hand, align the arrow on the spray cup
with the single-line mark on short spray nozzle on the machine body, and insert the spray cup
in position. Rotate the spray cup in clockwise direction, and align the arrow on the spray cup
with the double-line mark on short spray nozzle on the machine body, as shown in:
Figure 1. Fix the spray cup on the machine body. To remove the long spray cup, please rota te
the spray cup inversely (counterclockwise) as shown in Figure 2, and align the arrow on the spray
cup with the single-line mark on the machine body. Then the long spray cup can be pulled out.
2. Install spray cup with round brush or bent spray cup
For direct installation on short spray nozzle, aim the spray cup with round brush or bent spray
cup at the top of spray nozzle, as shown in Figure 3, and push the spray cup upwards until it
is in position. As the short spray nozzle and spray cup are positioned in six directions, the
angle and direction can be adjusted during the installation. Or, first install long spray cup and
then the spray cup with round brush or bent spray cup.The spray cup with round brush or
bent spray cup and long spray cup can be installed in the same procedures as the installation
on short spray nozzle.