Using The Memory Function; Averaging Function - Omron IntelliSense HEM-712C Manual De Instrucciones

USING THE MEMORY FUNCTION

Every time you complete a measurement the monitor stores the blood
pressure and pulse rate in the memory. The blood pressure monitor
automatically stores up to 30 measurement values. When 30 sets of
measurement values are stored in the memory, the oldest record is
deleted to save the most recent measurement values.

AVERAGING FUNCTION

The monitor also calculates an average reading based on the values of
the three most recent measurements that were taken within 10 minutes
of the most recent reading.
NOTES:
• If only two readings are stored in the memory for the
10-minute period, the average is based on the two readings.
• If one reading is stored in the memory for the 10-minute
period, this reading is displayed as the average.
If the date and time is not set, the measurement values and the average
value will not be stored in the memory correctly.
1. Press the MEMORY button
The Average Value Symbol will display on the screen with the
average reading.
16