THOMSON GENI MIX PRO CONNECT Manual De Instrucciones página 53

AUTO CLEAN
Press this button in standby mode and it's icon on LCD starts flicker,
•
press knob to start clean.
It will show "End" when cleaning finished and goes to standby mode
•
if no operation after 10 minutes.
BLUETOOTH
To use the machine with your Smartphone or Tablet and the Smart
Cook app, you will need to pair it first:
To pair the machine, install and launch the app, then create your
user account. Then, switch on the machine and start a search
using the connection icon on top right of the app screen.
In the search window, select "Thomson Geni mix" and verify the
connection icons on both the app and the machine screens.
Once the first pairing has been done, you will reconnect to the
machine every time you will launch or wake up the app.
Note: it is also possible to switch the machine is pairing mode by
pressing the Bluetooth button during 2 seconds until the Bluetooth
icon blinks.
The machine can accept up to 7 paired devices. Beyond this
count you won't be able to pair any additional device.
You can delete all pairing data when switching the machine in
firmware update mode by pressing the Bluetooth button during 5
seconds.
Note: if you have deleted all pairing data or updated the firmware,
you will need to pair again your devices. To do this, first remove the
machine from the paired device list in the Smartphone or Tablet
Bluetooth menu.
Bluetooth icon:
- At power on, the Bluetooth icon will blink to indicate it is available
for pairing or connection
- Following a successful pairing or connection, the icon will show
steady
- If pairing or connection are not done within 2 minutes, the
Bluetooth icon will disappear.
Operation
No connection
Connected via app
Long press 2 sec
Long press 5 sec
Mode
Connectable
Connected
Pairing mode
Reset and update mode
EN-21
Icon
Not shown
Steady light
Rapid blinks
Slow blinks