Denver ASA-30 Manual Del Usario página 10

The delay will be effective only if the sensors
have been assigned to the Delay Zone. To
assign a sensor to the Delay Zone, open its
cover and move the jumpers on the circuit
board according to the opposite drawing.
For more information, refer to the manual of
your alarm system.
Night Lamp mode
When used as a standalone alarm system, the ASA-30 can also be used
as an LED night lamp.
Press the "Home mode" button on the remote control twice: the siren
switches to Home Mode and the strobe light turns into a night lamp.
Press the "Home mode" button twice, then the "Arm" button once: the
siren is in monitoring mode with night lamp on. Press the "Disarm"
button: the siren is disarmed and the LED lights switch off.
10