Installation Requirements; Tools And Parts; Style 2: Custom Overlay Drawer Panels - KitchenAid Standard Manual De Instalación

Tools and Parts

TOOLS NEEDED:
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Hand drill or electric drill
(properly grounded)
¹⁄₈" Drill bit
⁵⁄₁₆" Socket wrench
6" Socket extension
(optional)
Additional Tools Needed for Style 2: Overlay (only):
Scissors
Pencil
PARTS NEEDED Style 2: Overlay (only):
Custom Overlay Drawer Panels —
See "Style 2: Custom Overlay Drawer Panels."
Hardware
#8 x ¹⁄₂" Pan-head screws (12) optional
PARTS SUPPLIED:
#8 x ¹⁄₂" Pan-head
screws (16)
Double-sided tape

Style 2: Custom Overlay Drawer Panels

If you plan to install custom wood panels, you will need to create
the panels yourself or consult a qualified cabinetmaker or
carpenter. See dimension drawings for panel specifications.
IMPORTANT:
The thickness of the overlay panels must be ³⁄₄" (19.05 mm).
To avoid damage to the drawers, each overlay panel must not
weigh more than 10 lbs (4.5 kg).
Do not exceed the height dimension for the overlay panels.
Panels that exceed the height dimension may damage the
refrigerator drawers, cabinets or countertop.
The width of the overlay panels may vary according to the
width of the cabinet opening.
Top Overlay Drawer Panel Dimensions
1.25"
(3.2 cm)
10.5"
(26.7 cm)
†®TORX is a registered trademark of Textron Innovations Inc.
4

INSTALLATION REQUIREMENTS

Tape measure
Level
Phillips screwdriver
T30 TORX ®† screwdriver
Scribe
Mounting Brackets (4)
26.5"
(67.4 cm)
12.7"
(32.2 cm)
23.5"
(59.7 cm)
1.5"
(3.8 cm)
Bottom Overlay Drawer Panel Dimensions
⁷⁄₈
"
(2.2 cm)
14.5"
(36.8 cm)
Flat Panels
You can create a custom flat panel using material less than ³⁄₄"
(19.05 mm) thick. The material must be laminated to either
plywood or medium density fiberboard that is ³⁄₄" (19.05 mm)
thick.
Raised Panels
You can create a raised panel design. Be sure to maintain a ³⁄₄"
(19.05 mm) minimum thickness where the overlay panel attaches
to the drawer front.
Raised Panel Attachment
(19.05 mm)
A. Drawer front
¹⁄₂
B. #8 x
C. Overlay panel
26.5"
(67.4 cm)
16.5"
(42.0 cm)
23.5"
(59.7 cm)
1.5"
(3.8 cm)
³⁄₄
"
" pan-head screw
A
B
C