NORAUTO NO6704 Instrucciones De Uso página 74

the chassis has to be connected first.
EN
The other connection is to be made to
the chassis, remote from the battery and
fuel line. The battery charger is then to
be connected to the supply mains. After
charging, disconnect the battery charger
from the supply mains. Then remove the
chassis connection and then the battery
connection.
SAFETY INSTRUCTIONS REGARDING BATTERIES
1. WARNING: Risk of explosive gas mixtures.
Working in the vicinity of a lead-acid
battery is dangerous. Batteries generate
explosive gases during normal battery
operation. For this reason, it is of utmost
importance that each time, before
using your battery charger, you read
this manual and follow the instructions
exactly.
2. Thanks to check that your batteries
can be recharged with this charger. To
know this, refer to the manufacturer's
instruction manual of the battery.
3. Make sure that the initial charging
r a t e d o e s n o t e x c e e d t h e b a t t e r y
manufacturer's requirement.
4. Do not put batteries in use during the
charge! Do not start the engine during
73