Installation Recommendations / Automatic Fan Protection Feature; Grounding Instructions - Kenmore 111.83502 Manual De Uso

Installation Recommendations
Remove all packing materials both outside and inside the oven before using the oven. The oven
requires free movement of air for proper operation. Do NOT block air vents located by the top air
grill and underneath the oven.

Grounding Instructions

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces
the risk of electric shock by providing an escape wire for the electric current. This appliance is
equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged
into a 120v, 15amp. outlet that is properly installed and grounded.
Consult a qualified electrician or service technician if the grounding instructions are not completely
understood or if doubt exists as to whether the appliance is properly grounded.
WARNING - Improper use of the grounding plug can result in a risk of electric shock.
Where standard two-prong wall receptacle is encountered, it is your personal reponsibility and
obligation to have it replaced with a properly grounded three-prong wall receptacle.
Do not under any circumstance cut or remove the third (ground) prong from the power cord. Do
not use an adapter plug with this appliance. See pages 1 and 2 of the Installation Manual for
acceptable extension cord specifications.
Interference Note
Microwave ovens generate radio frequency energy during operation and if not installed properly
may cause interference to radio and television reception. You can determine if this unit is causing
interference by turning it on and off while the interference is occurring. If interference occurs, it
may be corrected by one or more of the following measures:
• clean door and seal surfaces of the oven;
• reorient the television or radio receiving antenna;
• the oven with respect to the television or radio receiver, and/or
• Plug the oven into a different oulet so that it and the television or radio receiver are on different
circuits.
If the interference persists, you may want to consult an experienced radio/television technician for
additional information.
Automatic Fan Protection feature
The cooking range installed under the microwave oven may, under some heavy usage conditions,
cause temperatures high enough to overheat some internal parts of the microwave oven.
To prevent overheating from taking place, the exhaust fan is designed to automatically turn on
at a low speed if excessive temperatures occur. Should this happen, the fan cannot be manually
turned off, but it will automatically turn off when the internal parts have cooled. The fan may stay
on for up to an hour after the range and microwave oven controls have been turned off.
EN-5