Pairing A Bluetooth Device; Stereo Linking Two Speakers - ION PATHFINDER 2 Guia De Inicio Rapido

Pairing a Bluetooth Device

1. Turn on your Bluetooth device.
2. Power on Pathfinder 2. * If you have previously connected to another Bluetooth device,
Pathfinder 2 will reconnect. To disconnect pairing if the Bluetooth icon is lit solid, press
and release the Bluetooth button.
3. Press and release the Bluetooth button to pair to a Bluetooth device.
4. Navigate to your Bluetooth device's setup screen, find "Pathfinder 2" and connect. *
Note: If your Bluetooth device prompts for a pairing code, enter "0000".
5. To disconnect pairing while the Bluetooth icon is lit solid, press the Bluetooth button. *
6. To connect to another Bluetooth device, repeat step 3.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0 or higher.
* Tip: Press the Bluetooth button twice to enable or disable voice prompts.
Pairing a Bluetooth Device Using NFC
NFC (near-field communication) allows data exchange from devices, such as pairing, by gently
bumping them together. Check in your device's manual to see if this feature is supported.
To use NFC to pair with Pathfinder 2:
1. In order to use NFC, your device must be turned on and unlocked.
2. Enter your device's Settings menu and check that NFC is turned On (one time step).
3. Power on Pathfinder 2.
4. Press and release the Bluetooth button on Pathfinder 2 and the Bluetooth icon will flash
(only needed for the first time when NFC pairing with the device).
5. Touch and briefly hold your device to the NFC logo located on Pathfinder 2's top panel.
6. Follow the pairing instructions that appear on your phone. If a passcode is required, enter
"0000".
7. To unpair, gently bump your device against the NFC logo or disconnect the Bluetooth
connection from your device's Bluetooth menu.

Stereo Linking Two Speakers

To link two Pathfinder 2's together for stereo sound:
1. Press and hold the Play/Pause/Link button to enter Stereo Link mode. Once a link has
been established, the word LINK should appear in the display.
2. Select which unit will be the master (left channel) by pressing and releasing the Bluetooth
button.
3. To disconnect the link between the two speakers, double-press the Play/Pause/Link
button.
7