Connecting The Camera - DiO DiOCAM-RI01 Guia De Inicio Rapido

1. Connecting the camera

1 Connect the camera to the mains, making sure to push the cable home.
The red indicator light starts to ash. After a few seconds, you will hear a beep.
This indicates that the camera can be connected to WiFi via your
smartphone or tablet.
2 Download the free DiOCam Plus application and create your account.
3 Follow the instructions in the application to connect the camera to WiFi.
Make sure your WiFi network is available. Add the camera to the application
by clicking to the "+", choose the device to add and the select the way to
proceed (Scan QR code or smart con guration).
Note:
- This camera only supports 2.4GHz WI-FI network
(doesn't work with 5GHz)
- Make sure that the smartphone is well connected to
the right Wi-Fi network. When you have to register
the SSID, make sure you put the same Wi-Fi network
and the right password.
- A camera can only be added to one account.
If the camera has been already added, it cannot
be added on another account.
EN