Battery Installation/Replacement; Setting The Date/Time - MABIS Deluxe SmartRead Manual De Instrucciones

Battery Installation/Replacement

Replace the batteries when the Low Battery
symbol appears on the display, Fig. 1, or when the
display remains blank when the POWER
Button is pressed.
To change the batteries:
1. Open the battery cover.
2. Making sure the battery polarity is correct,
install two AAA alkaline batteries, Fig. 2.
3. Close the battery cover.
NOTE: It is recommended to remove the batteries
if the unit will not be used for an extended period
of time.
Fig. 1
Fig. 2
8

Setting the Date/Time

1. Press the 'Set' Button to enter into the Time
Adjustment mode. The blinking Month will display,
Fig. 1.
2. Press the 'MEM' button to change.
3. Press the 'Set' Button to confirm entry.
4. The blinking Date, Fig. 2, followed by Year, Hour
and Minutes will display. Repeat steps 2 and 3 to
adjust the date/time setting.
5. Your unit is now ready to take a reading, or
press the POWER button to turn the unit off,
Fig. 3.
MEM
Press the SET button
SET
blinking Month
changing Month
MEM
MEM
SET
SET
confirm the entry
Fig. 1
Fig. 2
Fig. 3
9