Bimar PA97 Folleto De Instrucciones página 25

- Night " " mode: activated by pressing the button; the device will only operate
at the minimum speed, with only the "
restore normal operation (deactivate night mode), repeat the procedure in
reverse.
- " " button: the ionising function produces a flow of negative ions which
neutralise the positive ions in the air. This function is activated whenever the
button is pressed; the light corresponding to the button will illuminate on the
display and the "
- " " button: press the button repeatedly to turn on the
light (underneath the control panel, as shown on the right)
with variable colour effects, steady (blue) and off; cannot
be operated with night mode active. If the device is in
standby (wi-fi light remains on), only the steady light is
available.
- Filter, comprising:

one H13 HEPA filter: traps PM2.5, smoke, dust mites and other pollutants

one pre-filter: traps larger particles such as hairs, fluff or threads.

1 activated carbon filter: absorbs harmful substances such as unpleasant
odours, mould and formaldehyde
Filter change alert light: the light
changing. To reset the light, press the "
seconds, switch off the device, remove the plug from the power socket and change
the filter.
The app's main screen shows concentric graphics and the
countdown of the hours left until filter replacement during
operation (total hours at start of count: 4320hr)
" symbol will appear on the screen.
" light illuminated on the display. To
) flashes (red) whenever the filter needs
" button (or use the App) for about 3
25/64