Fellowes POWERSHRED HS-440 Manual Del Usaurio página 3

BASIC SET-UP
SHREDDER SET-UP
1 2
Open the door
Place cutter head
into top of cabinet,
use 2 people
BASIC PRODUCT MAINTENANCE AND TROUBLESHOOTING
PAPER JAM
Set to Off ( ) and empty bin. Replace bin and follow the below
procedures.
2
1
Gently pull uncut
Stops automatically
paper from
if too much paper
paper entry.
is inserted.
Machine runs for
Automatic reverse
a short time in
if paper jams
reverse. Repeat if
necessary
CLEANING AUTO-START INFRARED SENSORS
Paper detection sensors are designed for maintenance free operation. However, on
rare occasions the sensors may become blocked by paper dust causing the motor to
run even if there is no paper present
of the paper entry).
TO CLEAN THE SENSORS
1
2
Turn off and
Locate Auto-start
unplug shredder
infared sensor
PROBLEM STILL NOT SOLVED?
Fellowes is committed to giving our customers the support and service they deserve. That is why we offer several options for you to find technical
information, step-by-step assistance and personal attention.
• www.fellowes.com features an extensive on-line support section with a number of self-service options
• Our customer service professionals are dedicated to resolve any of your issues
Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.
3
4
Ensure access
Make sure safety
to a dedicated
flap is securely
15Amp, 120V
in place
outlet
3
Shred One Sheet
(Note: two paper detection sensors are located in the center
3 4
Use thin, long-handled
Clean any
brush to clean sensors.
contamination from
Make sure brush is the paper sensors
clean and dry
BASIC SHREDDING OPERATION
PAPER
1 2
Press ( ) ON to
Plug in and make
activate
sure door is closed
OILING SHREDDER
All high security shredders require oil for peak performance. If not oiled,
a machine may experience diminished sheet capacity, intrusive noise when
shredding and could ultimately stop running. To avoid these problems, we
recommend you oil your shredder each time you empty your waste bin or
every 15-30 minutes of continuous use.
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
1 2
Set to Off ( ) *Apply oil
and unplug across entry
Important: For optimal shredding perfomance, use Fellowes High
Security oil (3505701). *Use of standard shredder oil is not
recommended.
WHEN IN SLEEP MODE
1
In sleep mode
3 4
Feed paper
When finished
straight into paper
shredding set to
entry and release
( ) OFF
3
Press Reverse (R)
15
2 3
To get out of sleep or insert paper
press ON ( )
5
o
Do nothing and
shredder will go
automatically to
sleep mode after
1 hour
3