Maintenance - Whittaker Smart Care TWIN Manual Del Operador

MAINTENANCE

During Operation:

Rotate brushes every 2-3 hours of operation.
This prolongs brush life and protects against
gear damage.

Do not lubricate axles—keep clean and dry.

Never rest machine with brushes directly on
the floor.

Place machine on storage tray when not in use
to prevent brush damage. Fig. 5-1.
After Each Use:
A. Unplug power cord (4) at wall outlet.
B. Tilt machine to its side onto the gear housing
(15) (opposite the power cord end of
machine).
C. Reach under with a finger and push axles up
and out. No tools are required if machine is
kept clean and brushes are rotated regularly.
D. Remove brushes. Inspect for wear. Use the
Brush Wear Indicator Card included with this
manual.
E. Wipe underside of machine with damp cloth.
Fig. 5-2.
F. Rotate the front brush end-to-end before
replacing and do the same with rear brush.
Storage:
Store machine upright in storage tray to protect
brushes on the machine. Fig. 5-1.
For the best protection of extra brushes when not in
use, invest in a Brush Caddy. Fig. 5-3. Two sets of 15"
or 20" brushes may be safely stored and transported.
5