Display; Display During Service - Pentair SFE Manual Del Usuario

S F E

4.2 Display

E
N
G
L
I
Key
S
1. Service status icon;
H
2. Weekdays icon;
3. Time display mode icon;
4. Programming parameters/regeneration status/time digit;
5. Power supply status icon (if it is enabled it indicates a lack of mains supply and storage of the
programming data to the memory);
6. Regeneration in progress icon.
The LCD display used on the controller shows a series of operation-related data.
The data displayed are:

4.2.1 Display during service

When the module is in operation, the display shows the following information:
• Time: xx:xx with flashing ":".
• Weekday, if the day of the week is flashing it means that the regeneration is enabled for that day.
• Service icon
• Residual volume and time are displayed alternately, if volume regeneration is enabled.
2
1
6
5
4
In service
24
3