Cosmo PDC 400 Manual De Uso página 20

3. Establish the
4. Control on the slide ruler the product quantity in kg/min (or lbs/ min) that will be spread;
5. Refer to the spreading chart sticked on the hopper and showed in the next paragraph
(par. 5.1.3).
According to the type of fertilizer (or product) used and to the product quantity in kg/min established
on the point mentioned above, get from the first line of the chart the value to which the dosing rod,
located on the spreader, should be positioned.
EXAMPLE 5: Fertilizer used = Magnatrox
Table value in kg/min = 23,4
Dosing rod setting = 24
Pendular Spreader PDV - PDHV models
feed motion speed to be kept during the working (from 4km/h to 15 km/h);
EXAMPLE 3: feed motion speed = 6 km/h
EXAMPLE 4: Product quantity to be spread = 24 kg/min
Spreading quantity of dosing rod
20