Worldcast Systems APT IP Silver Guía Rápida página 8

English version
1. Apply a name to the Stream.
2. Type can be Audio, AUX , "IP Forward" or "Media Forward" – select "Audio"
3. Enable "receive" on the Decoder
4. Ignore "Channel Number" at this stage – this is for stream type "IP Forward" only
5. Enter the IP port – ensure the other side of the link has the same IP port configured
6. Enable "Advanced Options" to enter the buffer size "Rx Latency". For linear PCM or aptX Enhanced
you can keep the default value (150 ms). For HE-AAC in this example you need to increase the
buffer size as shown in the screen shot
7. Enabling this checkbox provides the advanced stream options
Clicking on "OK" presents the stream in the streams table as shown below.
8. Click on "Create" in the toolbar of the page to create the configuration (for Encoder and Decoder).
9. To apply this configuration click on "Apply". This will immediately reconfigure the codec to these
settings (for Encoder and Decoder).
8
Figure 4 shows the completed profile configuration on the Decoder
For more details about the product please refer to the user manual.