Miele CarClean Set Plus Instrucciones De Manejo página 64

en (US/CA)
CarClean Set Plus
(see illustrations on pages 2, 4, and 5)
The accessories in the Miele CarClean
Set Plus should only be used with Miele
vacuum cleaner models S 227 - S 858
and the S 4000 and S 5000 series.
If your vacuum cleaner is fitted with
connection A (see below) you can use
the hose of the CarClean set, otherwise
an adapter must be used.
– Adapter B:
for S 4000 and S 5000 series.
– Adapter C:
for any other Miele vacuum cleaner.
^ Connect adapter, B or C, to the
CarClean Set hose, until it clicks. Pay
attention to the correct positioning
(see illustration).
64
CarClean Set Vario
(see illustrations on pages 2, 3 and 5)
The Miele CarClean Set Vario has been
designed as an accessory for
non-Miele canister vacuum cleaners.
The enclosed adapter, f, is required to
connect the accessories to non-Miele
canister vacuum cleaners.
Accessories
a Micro hose with combination nozzle
(crevice nozzle and dusting brush)
b Hand Turbobrush
c Crevice nozzle (12 in. / 300 mm)
d + e Suction hose (9.8 ft / 3 m) with
hose holder and connection (only in-
cluded with the CarClean Set Plus)
f Accessory adapter (only included
with the CarClean Set Vario)
Connecting the suction hose d
^ Fit the latch ring or the adapter into
the suction socket of your vacuum
cleaner (illustrations g to i).
^ To disconnect the hose from the va-
cuum cleaner, press the release but-
tons (illustrations j to l) and pull
the latch ring or adapter out of the
suction socket.