NZXT Z370 ATX N7 Manual Del Usario página 20

N7
• Connect the two cards together using the SLI Bridge Connector.
• Connect all PCIe power connectors of the graphics cards.
• Reconnect the power cord, power up the computer and install the drivers and soft-
ware included in your graphics card package.
Note
• For a single PCIe x16, please use PCIEX16_1.
• When adding or removing expansion cards, always turn off the power supply and unplug the power supply
power cable from the power outlet. Read the expansion card's documentation to check for any necessary
additional hardware or software changes.
16