General Safety Warnings - UFESA BP4570 Instrucciones De Uso

USE
The blender is suitable for preparing mayonnaise, puree,
compotes, milkshakes, jams, baby food or for chopping
up small quantities of walnuts or almonds.
Warning: The blender is not suitable for preparing mas-
hed potato.
• Slot the foot 5 onto the blender's motor housing 1 and
twist it to the left (anticlockwise) (fig. 4)
• Place the food you wish to process with the blender
into the corresponding jug 7
• Hold the blender and the jug. To stop the food from
splashing out during use, only switch the blender on
or off when the foot is immersed in the food being
processed.
To switch the blender on, press button 2 (Figure 5). If
you wish to use maximum speed during use, press bu-
tton 3 (Figure 5).
SPEED SELECTOR
The speed selector allows you to set the speed for the
type of food being processed. Low speeds are suita-
ble for starting the blending process, churning, bea-
ting and mixing ingredients, as well as whipping egg
whites. Higher speeds are suitable for beating eggs,
preparing batters, etc. (Figure 6)
UNIVERSAL MINCING ACCESSORY
BP4575 / BP4576 / BP4578 / BP4585
The accessories can also be acquired individually at any
Official Technical Service Centre for the brand.
Figure 1
9. Universal mincing accessory
10. Blade
11. Adapter
12. Lid
15. Ice crusher blade.
You can crush ice with the ice crusher blade (some mo-
dels). Optimum processing quantity: 4-6 ice cubes.

GENERAL SAFETY WARNINGS

Danger of injury from sharp blades / rotary
action!
Never touch the blade on the mincing accessory! Never
clean the blade on the mincing accessory by hand!
Always use a brush. The mincing blade must only be
held by the integrated plastic handle.
Important!
The adapter for the mincing blade must only be fitted or
removed with the appliance switch off.
USE
To mince meat, chop hard cheeses, onions, aromatic
herbs, garlic, fruit, vegetables, nuts and almonds (see
the table in fig. 9)
Attention!
Clean the meat of any bones, gristle or sinews before
mincing the it.
The mincing accessory is not suitable for grinding very
hard products (e.g. coffee beans, turnips, nutmeg) or
frozen foods.
Figure 7
• Push the mincing accessory 9 down onto a flat, clean
work surface
• Fit the blade 10 into the mincing accessory.
• Place in the food you wish to process with the min-
cer.
• Fit the adapter 11 onto the mincing accessory and
twist it to the right (clockwise) until it clicks shut.
• Place the drive unit onto the adapter and twist it to the
right (clockwise).
• Hold the drive unit and the mincing accessory and
switch the appliance on.
• Fit the lid 12 to protect the food minced with the min-
cing accessory (Fig. 8).
Examples of use:
Grated cheese for pasta dishes
Blend 200 g of moderately hard cheese (Emmental, etc.)
for ten second to obtain a thickly grated cheese, ideal
for sprinkling over pasta dishes.
WHISK ACCESSORY
BP4576 / BP4578 / BP4585
The accessories can also be acquired individually at any
Official Technical Service Centre for the brand.
Figure 1
14. Whisk.
13. Drive mechanism
Important!
Only fit or remove the drive mechanism with the balloon
whisk attached when the appliance is switched off.
Attention!
Never insert the whisk into the base unit without the
gear attachment.