Trouble Shooting - Russell Hobbs RHTTFZ1-EU Manual De Instrucciones

Trouble shooting

Problem
The freezer doesn't work
The temperature inside the
appliance is not cold enough
The temperature within the
appliance is too cold.
The inner surfaces of the
appliance are wet
The outer surfaces of the
appliance are wet
Excess ice or frost has built up
inside the appliance
Solution
Check that the appliance is switched on.
Check that there has not been a power cut.
Check that the plug is not faulty.
Check that the fuse has not blown.
Check that the voltage is correct for the appliance.
Are there any faults with the socket? For this purpose,
try the plug of your appliance by connecting it to a socket
which you are sure is working.
Check that there is not too much food in the appliance.
Check that the thermostat is set to a suitable
temperature.
Check that the appliance is not placed in direct sunlight,
or too near to a heating source.
Check that the ambient temperature is within the
operation limits of the appliance.
Are the doors of the appliance opened frequently? Once
the door is opened, the humidity found in the air in the
room enters the appliance, especially if the humidity
levels in the room are very high. The more frequently the
door is opened in humid conditions the more chance of
the build up of moisture.
Increase the working temperature by adjusting the
thermostat to a lower setting.
Caused by condensation - dry the inside of the appliance.
Caused by condensation - dry the outer of the appliance
carefully.
Check that the door has not been left open.
Check that the door gasket is clean and undamaged.
15