Stiga Play The Best T8742 Manual Del Propietário página 5

9. Screw U-support tube (#21) to Strut Tubes (#17) with two Screws (#33)
as shown in Figure 5. Align holes in U-support with holes in Strut Tubes
and thread screw (#33) into hole in Strut Tube (#17) tighten screws all
the way but be careful not to over tighten. You could strip threads on
screws if you over tighten.
10. Attach Linkages (#16) to Leg (#19) as shown in Figure 5. Pivot one
Linkage (#16) up and pivot Leg out from top and align hole in Linkage
with hole in Leg (#19). Attach Linkage (#16) to Leg (#19) using Hex
Head Bolt (#32), Spacer (#37) and Locknut (#34). Spacer (#37) goes
between Linkage and Leg. Attach other Linkage to Leg the same way.
Tighten nuts securely.
Figure 5
32
16
16
34
34
37
21
33
17
17
5
DO NOT OPEN THE TABLE TO PLAYING
POSITION UNTIL BOTH TOPS ARE
INSTALLED! DO NOT LEAVE TABLE
STANDING UNATTENDED. IT COULD
BE KNOCKED OVER CAUSING SERIOUS
BODILY INJURY OR PROPERTY
DAMAGE.
19
32
37
Spacer goes between
Linkage Arm (#16)
and Leg (#19)
16
33