Hollywog WiTouch Pro Guía Rápida De Instrucciones Iniciales página 2

What comes with your WiTouch
• 1 Hollywog WiTouch Pro device
®
• 1 Hollywog WiTouch Pro remote control
®
• 1 Package Hollywog
• 2 AAA alkaline batteries
• 1 CR2032 lithium battery (installed in remote)
Operate your WiTouch Pro
1. Prepare the treatment area by washing
and drying the skin thoroughly. Excessive
hair should be trimmed (NOT shaved),
and the treatment area should be void of
oils and/or lotions. DO NOT apply the
main device over broken skin.
2. Remove battery cover from WiTouch Pro
device with included screwdriver tool and
insert (2) AAA batteries noting correct +/-
polarity and replace cover.
3. Press and hold the ON/OFF button on the
WiTouch Pro device for one (1) second.
The LED will begin blinking green once
every two (2 seconds). Your WiTouch Pro
device is now ON and ready for use.
4. Remove clear battery insulation tab
from the remote control to activate
battery. Discard clear tab.
5. Remove two (2) WiTouch gel pads from
package and separate the pads at the
perforation in the liner.
6. Remove blue liners from gel pads by
peeling away the folded edges of the
liners. Align the shape of the gel pad to
match the shape of the black electrode
area, and apply gel pads to WiTouch
Pro device. Firmly press the gel onto the
electrode across the entire surface of the
gel pad to ensure good adhesion.
DO NOT remove green liners during
this step.
Pro?
®
WiTouch gel pads (5 pair)
®
• 1 Size #0 Phillips head screwdriver tool
• 1 Storage Box
• 1 User Manual
• 1 Quick Start Guide
7. Remove green liners from gel pads by
slowly peeling the liner from one inside
corner towards the outside corner of the
electrode area and apply WiTouch
Pro device on the back over area of pain,
aligning the center of the unit with the
spine.
DO NOT activate stimulation of the
device prior to application of the device
to the back.
8. Press and hold START/STOP button
on remote control momentarily to start
treatment stimulation mode. On the
WiTouch Pro device, the LED will now
begin blinking green very rapidly for the
duration of the treatment.
9. Press INCREASE INTENSITY (+) button
to increase stimulation intensity to a
comfortable level.
NOTE: The stimulation treatment will
automatically stop after 30 minutes. To
start a new treatment, repeat step 8. The
Hollywog WiTouch Pro device will turn off
after two (2) hours of inactivity. To turn on
the device, repeat step 3.
info@hollywog.com
® and ©2013 Hollywog, LLC. All Rights Reserved
Hollywog
2830 Amnicola Hwy
Chattanooga, TN 37406 USA
+1 423 305 7778
www.hollywog.com
•
Patents Pending