Esata Pvr Guide; Pvr Setup; Media Setup - Gi ST9195 Manual Del Usuario

5. eSATA PVR Guide

5.1 PVR Setup

5.2 Media Setup

26
MANUAL_GI ST9195_9196_Eng_100219 [cs4].indd 26
You can change the PVR configuration in PVR Setup menu.
To enter this menu, press MENU key in normal mode, and go to Channel / PVR
menu, then select PVR Setup.
- Time Shift : Configuration for recording the current channel automatically
If you set Time Shift to Enable(1 or 2 Hour), you can use time shift without
recording a channel explicitly.
- Default PVR Path : Configuration for selecting the default recording
device. If you attached the storage -SATA, USB-device, then you can select
the default recording device.
- Record Duration : Configuration for default user record duration.
If you select 2 Hour, then you can record a 2-Hour of channel when you
record.
You can see the information of hard disk and format a hard disk in Media Setup
menu. To enter this menu, press MENU key in normal mode, and go to Channel /
PVR menu, then select Media Setup.
You can use an external SATA storage, external USB storage and USB memory
stick. And it supports FAT16, FAT32, EXT2 and EXT3 file systems.
You can select the storage-SATA, USB- device in Media and select its partition.
If your storage is not formatted or formatted with an unsupported file system,
at first you have to format it. All data in the storage are removed when you
format, so please backup your data before format. You can format hard disk by
pressing OK key on Format item.
There are two ways of formatting hard disk - Media, Partition.
Media type is to format whole partition in hard disk and Partition type is to
format the partition that you select in Partition item.
You can delete all files in partition that you select with RED key.
You want to extract the hard disk, please do safe remove by pressing GREEN key.
2010-03-17 오후 6:33:35