Easy Iron Program
When to use
'Easy Iron'
Important!
Audio Signal
10
'Easy Iron' provides a short program consisting of approximately 8
minutes of heat with a cool tumble period of approximately 2 minutes.
It is a short conditioning program that softens the fibers, allowing them
to relax and making handling and ironing easier and less time
consuming.
However items are dried, outside on the clothesline, inside on a
radiator, hung around the home or using a tumble dryer, once dry they
usually get left in the same position/place for a long period of time. This
tends to cause garment fiber stiffness which can make the handling of
garments difficult and therefore the ironing time longer. Items dried in
any of the ways described above and left will benefit from the 'Easy
Iron' program.
The 'Easy Iron' cycle is not a drying program. It has been
designed to condition/soften items that have already been dried
and left unattended in this state for a period of time.
All materials do not behave in exactly the same way when heated.
For instance, our testing has shown that materials such as
Tencel® and Acrylics are not relaxed quite as effectively by
applying the 'Easy Iron' cycle as we found on the more traditional
Cottons and Polyester-cotton blends.
To obtain the best results from 'Easy Iron' it is important not to
exceed the weights recommended below.
For best results We recommend removing items from the
dryer immediately after the 'Easy Iron' program, to be hung,
neatly folded or ironed.
When this is not possible the 'Easy Iron' program should be
repeated.
Recommended weights and materials
Material
Cotton and Cotton blends
Synthetics
Denim
When the program is completed an audio signal is sounded to remind
you to remove the items from the dryer.
Maximum load
2 lb (2.5kg)
1 lb (2kg)
1 lb (2kg)