All American 50X Instrucciones De Operación página 11

ALL-AMERICAN PRESSURE STEAM STERILIZERS PARTS LIST
Part No. Description
54 Clamp bolt
55 Pin for clamp bolt
64 Bakelite wing nut
65 Control valve
72S Geared steam gauge
73 Lens for steam gauge (replacement)
76 Bakelite top handle
77 Bakelite top handle screw
78 Retaining bayonet clamp
79 Retaining bayonet clamp screw
111 Rack fits inside aluminum container for 50X
151 Rack fits inside aluminum container for 75X
405 Side handle, complete, for 75X
1010 Overpressure plug for sterilizer, red color
2050CS Excess pressure relief valve
2151 Stainless steel support stand (used inside 50X)
2153 On/Off toggle switch for 50X and 75X
2154A 120V Pilot light for 50X and 75X, 120 volt models
2154B 240V Pilot light for 50X and 75X, 240 volt models
2155-25 Air exhaust tube for 50X
2155-41 Air exhaust tube for 75X
2156 Aluminum container for 50X
2158FG Fiber gasket for #3158 and #4158 heating element (two needed)
2159FG Fiber gasket for #4159 thermoswitch (one needed)
2180 Support base for 50X (will elevate unit 1
*3158A 120V Heating element for 50X-120V (1650 watt, includes fiber gaskets)
*3158B 240V Heating element for 50X-240V (1650 watt, includes fiber gaskets)
3161 Cast aluminum control box for 50X
4151 Stainless steel support stand (used inside 75X)
4156 Aluminum container for 75X
4157A 120V Wiring harness, grounded 3-wire power supply cord for
50X and 75X, 120 volt models
4157B 240V Wiring harness, grounded 3-wire power supply cord for
50X and 75X, 240 volt models
4157C Single red wire lead for 50X and 75X
4157D "Y" blue wire lead for 50X and 75X
4157SRB Strain relief bushing for 50X and 75X
*4158A 120V Heating element for 75X-120V (1650 watt, includes fiber gaskets)
*4158B 240V Heating element for 75X-240V (1650 watt, includes fiber gaskets)
4159 Thermoswitch for 50X and 75X
4159TW Thermowell for #4159 thermoswitch (includes fiber gasket)
4160 Bakelite heat control knob for thermoswitch for 50X and 75X
4161 Cast aluminum control box for 75X
4180 Support base for 75X (will elevate unit 2
4190 60 minute mechanical bell timer
4190K Bakelite control knob for 60 minute mechanical bell timer
*6054 Thermometer, stainless steel, dual scale, C scale 10-150°;
F scale 50-300°
*There is a factory installation fee for the heating element, thermoswitch, and thermometer.
We recommend that the heating element, thermoswitch, and thermometer be replaced at
the factory. NO GUARANTEE OR RESPONSIBILITY FOR THE PROPER
FUNCTIONING OF THESE PARTS CAN BE ASSUMED BY THE COMPANY IF
THEY ARE NOT INSTALLED AT THE FACTORY.
3 ⁄ " above table surface)
8
1 ⁄ " above table surface)
4
10