Brandson Equipment 303030 Manual Del Usaurio página 54

Fix the outer pipe (11) to the pedestal (13) from below using the fastening screw
(14).
6. Usage
Keep the fan in an appropriate location and connect the device to a properly
installed 220-240V AC socket.
By loosening the tilt setting (16) and then tipping the protective cage, you can
change the angle of inclination according to your needs. Then tighten the tilt
setting at the desired position.
Push the pin at the top to enable the oscillation. If you do not want to use the
oscillation function, pull the pin out slightly.
You can select between three different speed levels using the rotary switch on the
motor unit.
Speed level
0
1
2
3
7. Cleaning
Pull out the power plug from the socket before starting with the cleaning process!
Use a slightly moist cloth for cleaning (wetted with water). For cleaning, never
immerse the device into water! This could lead to electric shock or fire!
8. Safety instructions and liability disclaimer
Never try to open the device to carry out repairs or conversions. Avoid contact
with mains voltages. Do not short-circuit the product. The device is not certified
for use in the open air; only use it in dry conditions. Protect it from high humidity,
water and snow. Keep it away from high temperatures. Do not subject the de-
vice to sudden changes in temperature or heavy vibration as this might damage
electronic components. Examine the device for damage before using it. The unit
should not be used if it has received an impact or has been damaged in any other
way. Please observe national regulations and restrictions. Do not use the device
54
Off
Slow
Medium
Fast
English