Flow Rate - Curtis Dyna-Fog 2790 Manual Del Usaurio

FLOW RATE

KNOB
Metering Valve Setting in
Flow Rate
Smaller flow rated can be obtained
locating the valve setting bellow the L
setting, up to virtually "no flow" position.
Metering Valve Setting in
Flow Rate
Metering Valve Setting in
Flow Rate
The maximum flow could be obtained by
fully opening the valve.
- Page 4 -
Turning the knob of the
control valve regulates the
flow rate.
If the knob is
clockwise, the flow rate will
be reduced.
If the Knob is
counterclockwise, the flow
rate will be increased.
As reference, the diagrams
below illustrate the average
flow rate at three different
positions using water.
LOW
Position
= 6.4 Ounces/Minute
= 3.0 Gal/Hour
= 189 ml/min
= 11.3 L/Hour
MED.
= 8.0 Ounces/Minute
= 3.7 Gal/Hour
= 236 ml/min
= 14.2 L/Hour
HIGH
= 9.0 Ounces/Minute
= 4.2 Gal/Hour
= 266 ml/min
= 15.9 L/Hour
rotated
rotated
Position
Position