Childlock - Leggett & Platt Premier Serie Manual Del Usaurio

Table of Contents
SET CHILDLOCK PASSCODE
App comes with Childlock factory enabled. Default passcode is 4321. To edit
passcode, follow these steps:
1. Tap the Settings icon
2. Tap Set Childlock Passcode.
3. Enter a 4-digit passcode in the Set Passcode dialogue box. You will be
prompted to re-enter passcode. Note: Once set, passcode must be entered to
access the app.
Passcode may be disabled by tapping the Settings icon, then tapping Disable

Childlock.

To minimize the risk that a child can operate this automatic
device, WE STRONGLY RECOMMEND THAT THE CHILDLOCK
WITH PASSCODE NOT BE DISABLED.
Note: If you forget your passcode, uninstall app completely and reinstall.
CHILDLOCK
at the top of the screen.
13