Add New Push/Reprogram; Unlearn Procedure; Recall Function - Honeywell RCWL35 Serie Instrucciones De Instalación

Installation Instructions
Installation
7. To add new push/reprogram
Press and hold the program button l. The icons will illuminate
in sequence. Release the program button when icon you
choose is illuminated. Operate your new push and the chime
will play tune, icon will flash. To change tune, refer to step 6.

8. Unlearn procedure

To remove a push from the chime's memory, press and hold the
program button l. Each icon will light in turn. When the icon
associated with the push to be un-learned is lit, release the button. Then press
and hold down both l and

9. Recall function

A short push of the program button l will flash the icon that was last in use.
69-2115EFS—05
69-2115EFS_C.indd 6
buttons, until a 'beep' sound is heard.
6
12/17/2007 2:23:56 PM