Klarstein 10029702 Manual Del Usaurio página 19

+/- button
FAN button
X-FAN button
Sleep
Timer
Function Introduction for Combination Buttons
Child lock function
Pressing "+" and "-" buttons simultaneously can turn on or turn off child lock function. When child lock function
is started up, LOCK indicator on remote controller is ON.
If you operate the remote controller, remote controller won't send signal.
Temperature display switchover function
Under OFF status, pressing "-" button and "MODE" button simultaneously can switch between °C and °F.
19
• Pressing + or - button once will increase or decrease set temperature by 1°C(°F). Hol-
ding + or - button for 2s, set temperature on remote controller will change quickly.
Release the button after your required set temperature is reached.
• When setting Timer On or Timer Off, press + or - button to adjust the time. (See
TIMER Button for setting details)
Pressing this button can select fan speed circularly as: AUTO > LOW > MEDIUM > HIGH.
Under Auto speed, air conditioner will select proper fan speed automatically according
to ambient temperature. Fan speed can't be adjusted under Dry mode.
Press this button under cool and dry mode to start up x-fan function.Press this button
again to cancel x-fan function. When x-fan function is on, if the air conditioner is turned
off, indoor fan will still operate at low speed for a while to blow the residual water inside
the air duct. During x-fan operation, press X-FAN button to turn off x-fan function. In-
door fan will stop operation immediately.
Under Cool and Dry mode, press this button to turn on Sleep function. Press this button
to cancel Sleep function. Under Fan mode, this function is unavailable.
• When unit is on, press this button to set Timer Off. T-OFF and H icon will be blinking.
Within 5s, press + or - button to adjust the time for Timer Off. Pressing + or - button
once will increase or decrease the time by 0.5h. Holding + or - button for 2s, time will
change quickly. Release the button after your required set time is reached. Then press
TIMER button to confirm it. T-OFF and H icon will stop blinking.
• When unit is off, press this button to set Timer On. T-ON and H icon will be blinking.
Within 5s, press + or - button to adjust the time for Timer On. Pressing + or - button
once will increase or decrease the time by 0.5h. Holding + or - button for 2s, time will
change quickly. Release the button after your required set time is reached. Then press
TIMER button to confirm it. T-ON and H icon will stop blinking.
• Cancel Timer On/Off: If Timer function is set up, press TIMER button once to review
the remaining time. Within 5s, press TIMER button again to cancel this function.