Assembly; Assembling The Marking Disc - Sachtler Ace Follow Focus Manual De Instrucciones

EN EN

Assembly

Assembling the marking disc

The Ace Follow Focus comes supplied with a marking disc that is easy to remove and replace.
The marking disc clicks into place over the handwheel.
To assemble the marking disc onto the Ace Follow Focus (see Fig. 2):
Ensure that the cut out on the marking disc [A] is aligned with the point on the handwheel
[B].
Slide the marking disc over the handwheel and it push into position until an audible click
is heard.
Fig. 2 Assembling the marking disc
-4-