Aprimatic 43800/001 Instrucciones Para La Instalación página 12

4.5 Removing an end stop
Press the P2 key
Ignition
once.
4.6 Additional remote control
A maximum of 20 remote controls may be associated with a motor.
The minimum time necessary for ignition is 5s.
4.7 One-channel remote control deletion procedure
• CMS wireless tubular motor (with emergency manoeuvre function)
Motor powered: press P2 once, press the Stop button once
and then press P2 again. A beep will be heard each time.
• SMS wireless tubular motor (without emergency manoeuvre function)
Motor powered: press P2 once, press the Stop button
once and then press P2 again. No beep will be heard.
The removal of the remote control entails the
cleaning of the emitters and of the limits of the end
stop for 43800/001 and 43801/00X.
4.8 Five-channel remote control deletion procedure
Remember to select the required channel using the RIGHT or LEFT button before deleting each channel following the method
described above for the SMS and CMS models. The LED corresponding to the selected channel will light up.
Warning: Press the UP/DOWN control before proceeding with the deletion procedure if the power is turned off and back on.
12
Press the Down
key once.
a
Ignition
Press quickly for 2
times the P2 key of
the "a" remote
control.
Press the P2 key
once.
Remote
addition OK.
b
The motor will emit
Press once the
three
P2 key of the "b"
followed by a short
remote control.
rotation.
Press the UP/DOWN button on the
remote control to confirm deletion.
Three beeps will be heard followed by the
motor turning briefly in the up/down
(opening/closing)
successful deletion.
The motor will emit
three beeps followed
by a short rotation.
control
beeps
directions to confirm