Publicidad
Idiomas disponibles
Idiomas disponibles
2. Installing the KOOS baby carrier
on the platform
2a -
Drop the baby carrier so it locks into place with the Pro-
Fix fasteners (9).
2b -
Check that both sides are fastened into place, the indi-
cator should be green.
2c -
Set the KOOS handle to the auto position, the car sym-
bol should be complete.
2d -
Turn the handle (5) so that the whole ensemble is secu-
re against the backrest of the vehicle
3. Detaching the KOOS baby carrier
from the platform
3a - Pull the buttons on both sides of the handle of the
baby carrier to release the Pro-fix anchors and lift the
baby carrier off the base.
WARNING
Never leave the child alone.
Any alteration or addition to the device without due au-
thorisation from JANÉ may seriously alter the safety of
the retention system.
Read these instructions carefully before use and keep
them for future reference. Your child's safety may be af-
fected if you do not follow these instructions.
This safety device must not be used without its uphol-
stery, or with different upholstery that is not the original
one, as it forms part of the safety characteristics of the
system.
Check that the seat has been installed correctly.
19
Publicidad
