Installing The Unit; Hardware Overview - Axis T8120 Guia De Instalacion

Page 8

Installing the Unit

1. Connect the PoE Midspan to an AC outlet (100-240 V AC), using a
standard power cable.
2. Connect the unit Data In jack (input) to the remote Ethernet
network switch Patch panel.
3. Connect the Data & Power Out jack (output) to the terminal.

Hardware Overview

Port connectivity
indicator
CAT 5 Cable
Indicators
LED
Yellow On
Green On
Green Blinking
AXIS T8120 Installation Guide
Data and Power out
Output port
Terminal
Indicated Behavior
Power is on (power is active)
A remote terminal is connected
Overload state or short-circuit
Data in
Input port
Ethernet