Using The Remote Control; Cleaning Mode; Additional Function - Samsung POWERbot SR20H9050U Serie Manual De Usuario

Using the remote control

1 power/recharging
Power
Recharging

2 Cleaning mode

Auto clean
Spot clean
Max clean
Manual clean
Start/Stop

3 additional function

Silence mode
Dust sensor
mode
Sound
inserting batteries
Open the battery cover by lifting it up
while pressing the locking tab and
insert the batteries as shown in the
illustration. Then, close the cover until
it clicks into place.
[A type] [B type]
ENGLISH-16
Turn POWERbot's power on/off
Select to recharge POWERbot at the docking station
while it is in cleaning process
Select to automatically clean the entire space once
Select to clean a localized area intensely
Select to make POWERbot to clean until battery
indicator flashes after reaching down to one level
Select to manually control and clean by using the
remote control
Select to start or stop cleaning process
Select to clean with lower operation noise
✻ ✻ Turbo mode is not available
In Auto clean mode
fWhen dust intake is detected, suction of
POWERbot will become stronger and it will move
around that area to focuses on cleaning the
surrounding area.
In Spot/Max/Manual clean
fWhen dust intake is detected, suction of
POWERbot will become stronger.
Each time you press this button, Sound Effects →
Mute is selected in this sequence.
✻ ✻ Remote control function NOT supported.