Jameson Easy BUDDY 6-14-300M Manual De Operación Y Seguridad

Since 1956
• DO NOT USE ON LIVE CIRCUITS. DISCONNECT POWER. Metal tip on rod.
• Wear safety glasses and gloves.
• Keep rod inside reel when not in use. Out-of-control rod can harm personnel or property.
• Keep rod clean. Some contaminants (including water) can conduct electricity.
• Keep secure footing. Protect yourself from falling should pulling eye move suddenly or separate from rod.
• Check for rod damage prior to use. Cracks, gouges, nicks, or white stress marks on jacket or sharp bends will weaken rod.
Injury could result if rod breaks while pulling.
• Do not use slip joint pliers, locking pliers or powered pulling equipment on rod.
• Do not force a pull that is stuck. Remove wires and check for kinks or obstructions.
• Avoid pulling rod over sharp edges.
• Do not bend rod beyond 4" radius.
Read manufacturer's instructions before using adhesive. In case of eye contact, flush with water and seek medical atten-
tion If skin contact occurs, apply solvent (such as nail polish remover) to area and gently remove adhesive. Wash solvent
off with water. Solvents should not be used in case of contact with eyes or open wounds.
Always wear safety goggles (ANSI Std. Z87.1) and gloves when working with adhesive and/or unprotected fiberglass rod.
See adhesive product label for Safety Data Sheet (SDS).
Accessory Kit
Attaches to Rodder Frame
For Easy Access
Jameson products carry a warranty against any defect in material and workmanship for a period of one year from date of shipment unless failure is due to
misuse or improper application. Jameson shall in no event be responsible or liable for modifications, alterations, misapplications or repairs made to its products
by purchaser or others. This warranty is limited to repair or replacement of the product and does not include reimbursement for shipping or other expenses
incurred. Jameson disclaims any other express or implied warranty.
OPERATION AND SAFETY MANUAL
Part
Number
6-14-AK Accessory Kit
6-139 Swivel Eye
6-140 Splice Repair Kit
6-141 Roller Guide
6-143 Swivel Coupling
6-146 End Ferrule Repair
6-148 Rod Grapple Set
6-160 Pulling Eye
6-162 Flexible Leader
6-14-BAG Zippered Bag
6-14-COV Cover
WARNING - ADHESIVE
Accessories - Sold Separately
Splice Ferrule, Pulling Eye, End Ferrule, Adhesive, Emery
Cloth, Canvas Pouch
Attach pull line or grip to freely rotating eye
Splice Ferrule, Adhesive, Emery Cloth, Instructions
Guide rod through bends, sweeps, misalignments, wires
Connect two rods when single length is not long enough;
provides rotation when pulling line, wire or rope.
End Ferrule, Adhesive, Emery Cloth, Instructions
Connect two rodders from opposite directions
Attach to end fitting of rod for pull line attachment to rod
Guide rod through bends, sweeps, misalignments
Protect Easy Buddy from moisture and UV rays when not
in use and during transport
Warranty
Part Number Buddy® Model
6-14-300M 300' X 1/4" Easy Buddy
6-14-400M 400' x 1/4" Easy Buddy
6-14-500M 500' x 1/4" Easy Buddy
Grapples
Swivel
Eye
Roller
Guide
End
Ferrule
Flexible
Leader
EB_MO3