Descargar Imprimir esta página

Philips SalonStraight HP4688/00 Manual De Instrucciones página 10

Ocultar thumbs Ver también para SalonStraight HP4688/00:

Publicidad

Idiomas disponibles

Idiomas disponibles

EnglisH
10

Comb or brush your hair so that it is disentangled and
smooth. (Fig. )
Use a comb to divide the hair into sections. Do not put too much hair in
one section.
Tip: It is better to section off the crown area and to straighten the hair
underneath first, followed by the top area.
5
Take a section that is approximately 3-4cm wide.
6
Hold the straightener in such a way that the marble protection
plates point upward and the hot straightening plates point
downwards (Fig. ).
-
Look at the symbol on the appliance. (Fig. 5)
If the hot straightening plates point in the wrong direction, turn the
appliance around. When you slide the straightener down the hair, the hot
straightening plates must touch the hair before the marble protection
plates.
7
Press the handles of the appliance firmly together.

Slide the straightener down the lock of hair in 5 seconds, from root
to hair end, without stopping (Fig. 6).
9
Repeat this process after 0 seconds until you have achieved the
desired look.
10
Let your hair cool down. Do not comb or brush it before it has
cooled down, as this would ruin the hairstyle you have just created.
Cleaning
1
Make sure the appliance is switched off and unplugged.

Let the appliance cool down completely on a heat-resistant surface.

Clean the appliance with a damp cloth.
storage
Never wind the mains cord round the appliance.

Publicidad

loading

Este manual también es adecuado para:

Salonstraight hp4688