Bellman & Symfon BE1510 Manual De Instrucciones página 36

70
Signal Exterior external
switch trigger
Green 1
Green 2
Green 3
Green 4
Orange 1
Orange 2
Orange 3
Orange 4
Pushbutton
Green 1
Green 2
Green 3
Green 4
Green 4
Green 3
Green 2
Green 1
Type LED pattern Sound
Orange 2 Orange blinks in Baby
sequences of two
Orange 3 Orange blinks Baby
in sequences of
three
Orange 4 Orange blinks Baby
constantly
VMA Red and Orange VMA constant
constantly blink
alternately
Fire alarm Red blinks Fire alarm
constantly constant
Setting the Activation Pattern
The Bellman Visit 868 Repeater can be activated in two different ways.
On delivery the Repeater sends the same signal regardless of the input causing the activation.
By changing the Signal Switches (4), different inputs on the same Repeater can transmit different Signal
Patterns.
In this way the same Repeater can be used to forward signals from the Bellman Visit 868 System at the
same time as it can transmit a Door Signal when activated via the Exterior External Trigger (3) and a
Baby Cry signal when activated via the Test Button (2).
The following figure shows the standard settings that are available:
Vibration Flash
Rapid Yes
Rapid Yes
Rapid Yes
Long Yes
Long Yes
71