Kenwood FP540 Serie Manual De Instrucciones página 8

to use the cutting discs
1 Fit the drive shaft and bowl onto the
power unit.
2 Holding by the centre grip
disc onto the drive shaft with the
appropriate side uppermost
3 Fit the lid.
4 Choose which size feed tube you want
to use. The pusher contains a smaller
feed tube for processing individual
items or thin ingredients.
To use the small feed tube - first put
the large pusher inside the feed tube.
To use the large feed tube - use both
pushers together.
5 Put the food in the feed tube.
6 Switch on and push down evenly with the pusher - never put
your fingers in the feed tube.
hints
G
Use fresh ingredients
G
Don't cut food too small. Fill the width of the large feed tube
fairly full. This prevents the food from slipping sideways during
processing. Alternatively use the small feed tube.
G
When using the chipper disc, place ingredients horizontally.
G
When slicing or shredding: food placed upright
shorter than food placed horizontally
G
There will always be a small amount of waste on the plate or in
the bowl after processing.
k f
k
citrus press
25
Use the citrus press to
squeeze the juice from citrus
fruits (eg oranges, lemons,
limes and grapefruits).
cone
sieve
k e
k d
, place the
k e
.
k f
comes out
k g
.
k g
k i
k h
to use the citrus press
1 Fit the drive shaft and bowl onto the power unit.
k d
2 Add the sieve and turn clockwise until the interlock fin on the
sieve aligns with the line on the outlet cover
3 Place the cone over the drive shaft turning until it drops all the
k i
way down .
4 Cut the fruit in half. Then switch on and press the fruit onto the
cone.
G
The citrus press will not operate if the sieve is not
locked correctly.
k
mill
26
Use the mill for milling herbs, nuts and coffee
beans.
blade unit
sealing ring
jar
sprinkler lid
safety
G
Never fit the blade unit to your machine without
the jar fitted.
G
Never unscrew the jar while the multi-mill is
fitted to your machine.
G
Don't touch the sharp blades. Keep the blade
unit away from children.
G
Never remove the multi-mill until the blades have
completely stopped.
important
G
To ensure long life of your mill, never run for longer than 30
seconds. Switch off as soon as you've got the right consistency.
G
Don't process spices - they may damage the plastic.
G
The machine won't work if the mill is fitted incorrectly.
G
Use for dry ingredients only.
to use your mill
1 Put your ingredients into the jar. Fill it
no more than half full.
2 Fit the sealing ring into the blade unit.
3 Turn the blade unit upside down.
Lower it into the jar, blades down.
4 Screw the blade unit onto the jar until
it is finger tight.
5 Remove the liquidiser outlet cover by
turning in an anti clockwise direction.
6 Place the mill on the liquidiser outlet
and turn to lock in a clockwise
direction k.
j
7 Switch on to maximum speed or use the pulse control.
8 After milling, you can replace the blade unit with the sprinkler lid
and shake out your food.
G
The sprinkler lid is not airtight.
hints
G
Herbs are best milled when clean and dry.
5
k h
.
k
j