7.8
RINGTONE AND VOLUME
The ringtone melody and volume can be adjusted using the arrow
keys. The settings include:
•
Volume
•
Ringtone melody
8
Frequently asked questions
Problem
•
The indoor unit does not
switch on.
•
The ring tone volume is too
low.
•
I connected the indoor unit to
a lock but it does not work.
•
I hear interference on the
line.
Solution
•
Make sure that the monitor is
connected to the power
source.
•
Make sure the adapter plug is
properly pushed in to the
power outlet.
•
Perhaps you extended the
cable. Extending the cable
can reduce the volume due to
being too long or too thin.
•
Check if the lock is connected
properly and that a suitable
lock with an external power
source is used.
•
Move other electronics away
from the unit to minimize
interference.
•
Perhaps the cable is too long
or the wire too thin.
•
There is no sound between
the outdoor unit and the
indoor unit.
9
Specifications
Monitor
Screen size
Color Configuration
Video System
Effective Pixels
Consumption Current
Operation Temperature
Operation Humidity
Supply Voltage
Doorbell
Imaging Sensor Type
View Angle
Minimum Illumination
Night vision distance
Operating Temperature
Instruction manual
•
The microphone may be
obstructed. Clean the
microphone.
•
Check that the cables are
connected and fastened
properly.
7"(Diagonal) inch
R.G.B.delta
PAL/NTSC
800X3(RGB)X480
450±200mA
-10°C ~ +50°C
85%(Max)
DC 15V 1A
1/4"CMOS
about 100o
0Lux
0.5 ~ 1m
-10°C ~ +50°C
EN
13