Technical Specifications; Troubleshooting; Declaration Of Conformity - STEINEL PROFESSIONAL RS PRO 5800 Manual Del Usaurio

Technical Specifications

Dimensions (H x W x D)
RS PRO 5800: 1278 x 105 x 105 mm
RS PRO 5850: 1583 x 105 x 105 mm
Power supply: 220-240 V, 50/60 Hz
Output:
RS PRO 5800: 40 watts / 4600 lm / 115 lm/W
RS PRO 5850: 52 watts / 5820 lm / 112 lm/W
Colour temperature: 4000 K (cool white)
HF system: 5.8 GHz (responds to the slightest movement regardless of temperature)
Angle of coverage: 360°, with 160° angle of aperture (if applicable, through glass, wood or stud walls)
Mounting height: 3.5 m max.
Transmitter power: approx. 1 mW
Reach: 2-8 m all-round
Max. area covered: approx. 50 m 2
Basic light level: 10-50 %
Time setting: 1 min. - 20 min. + install mode
Twilight setting: 2-2000 lux + teach-in mode
Temperature range: -20 °C to +30 °C
IP rating: IP 66
Protection class: I
Material: Impact-resistant plastic, IK07
Intrinsic power consumption 0.3 W

Declaration of Conformity

This product complies with
- Low-Voltage Directive 2014/35/EC
- EMC Directive 2014/30/EC
- RoHS Directive 2011/65/EC
- R&TTE Directive 1999/05/EC
- WEEE Directive 2012/19/EC
Declaration of Guarantee
All rights are based on our guarantee period. We guaran-
tee that your STEINEL Professional sensor product will
remain in perfect condition and proper working order for
a period of 5 years. We guarantee that this product is free
from material, manufacturing and design flaws. In addi-
tion, we guarantee that all electronic components and
cables function in the proper manner and that all materials
used and their surfaces are without defects.
Making Claims
If you wish to make a claim, please send your prod-
uct complete and carriage paid with the original receipt
of purchase, which must show the date of purchase and
product designation, either to your retailer or contact us
at STEINEL (UK) Limited, 25 Manasty Road, Axis Park,
Orton Southgate, Peterborough, PE2 6UP, for a returns
number. For this rea- son, we recommend that you keep
your receipt of pur- chase in a safe place until the guaran-
tee period expires. STEINEL shall assume no liability for
the costs or risks involved in returning a product.
For information on making claims under the terms
of the guarantee, please go to
www.steinel-professional.de/garantie
If you have a guarantee claim or would
like to ask any question regarding your
product, you are welcome to call us
at any time on our service hotline
01733 366700.
- 12 -

Troubleshooting

Malfunction Cause
SensorLight without power M Fuse faulty in building's fuse box,
not switched on, break in wiring
M Short circuit in mains power
supply lead
M Any mains switch off
SensorLight does not switch ON M Wrong twilight setting selected
M Fluorescent lamp faulty
M Mains switch OFF
M Fuse faulty in building's fuse box
SensorLight does not switch OFF M Continuous movement in the
detection zone
SensorLight switching ON despite M Light installed on a surface
no movement being detected
exposed to vibration
M Movement occurred, but not
identified by the sensor (move-
ment behind wall, movement
of a small object in immediate
lamp vicinity etc.)
SensorLight does not switch ON
M Rapid movements are being
despite movement taking place
suppressed to minimise malfunc-
tioning or the detection zone you
have set is too small
M Mains power supply lead
connected the wrong way
round (L and N)
Remedy
M Fit new fuse, switch on mains
switch, check wiring with
voltage tester
M Check connections
M Switch on mains power switch
M Adjust setting
M Change fluorescent lamp
M Switch on
M Fit new fuse in building's fuse box,
check connection if necessary
M Check zone
M Securely mount enclosure
M Check zone
M Check zone
M Check connections L and N
or test phase
- 13 -