Master audio LNC Serie Manual Usuario página 13

Master Audio
Fig.4. Bi-amplified with full range cabinets configuration (option 1)
Fig.5. Bi-amplified with full range cabinets configuration (option 2)
WARNING!!!!: In order to allow a bridge connection between cabinets, each one of
them has been provided with two Speakon connectors that allow the Input / Output
function indistinctly. Terminal Pins +1/-1 must be always used, disregarding the +2/-2
which are not internally connected.
3. MOUNTING AND PLACEMENT
For a proper installation of the acoustic cabinet systems, it is strongly recommended
to carefully read the following advices.
3.1. Placement
It is advisable to locate the low frequency units on the floor as they can take
advantage of the so-called "floor-effect", thus increasing the response in the low
frequencies.
If possible, place the subwoofers under the same acoustic axis used for the satellites.
If the above option can not be carried out, then they should be placed in an
intermediate point between the left and right channels.
LNC Series. Version 1.1 Abr 11
13